Our Products
Brand: TORK CRAFT
MPN: TCCP032
Tork Craft Chassis-Screw Sheet-Metal Punch — 32 mm (TCCP032)
Size: 32 mm diameter hole
This Tork Craft 32 mm sheet-metal punch is engineered for fast, clean hole cutting in sheet steel and chassis panels. The
tool uses a punch and die mechanism to deliver precise holes — ideal when preparing metalwork for screws, rivets or mounting hardware. According to
the manufacturer the tool is suitable for sheet metal up to approximately 1.625 mm thickness.....
N$ 481.85
Ex VAT:N$ 419.00
Brand: TORK CRAFT
MPN: TCCP035
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 35 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 561.78
Ex VAT:N$ 488.50
Brand: TORK CRAFT
MPN: TCCP038
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 606.05
Ex VAT:N$ 527.00
Brand: TORK CRAFT
MPN: TCCP040
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 40 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 612.38
Ex VAT:N$ 532.50
Brand: TORK CRAFT
MPN: TCCP050
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 50 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 776.83
Ex VAT:N$ 675.50
Brand: TORK CRAFT
MPN: TCCP054
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 54 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
N$ 796.38
Ex VAT:N$ 692.50
Brand: TORK CRAFT
MPN: TCCS15014
Compounding sponge
Pattern: Standard
Density: Firm
Colour: Orange
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
P..
N$ 144.33
Ex VAT:N$ 125.50
Brand: TORK CRAFT
MPN: TCCS15014-1
Compounding sponge
Pattern: Standard
Density: Firm
Colour: White
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
PO..
N$ 188.60
Ex VAT:N$ 164.00
Brand: TORK CRAFT
MPN: TCCS15014-2
Compounding sponge
Pattern: Standard
Density: Soft
Colour: Red
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
POLI..
N$ 274.28
Ex VAT:N$ 238.50
Brand: TORK CRAFT
MPN: TCCS15014-3
Compounding sponge
Pattern: Standard
Density: Soft
Colour: Black
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
PO..
N$ 229.43
Ex VAT:N$ 199.50
Brand: TORK CRAFT
MPN: TCCS15014-4
Compounding sponge
Pattern: Standard
Density: Firm
Colour: White
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
PO..
N$ 182.85
Ex VAT:N$ 159.00
Brand: TORK CRAFT
MPN: TCCS15014-5
Compounding sponge
Pattern: Waffle
Density: Soft
Colour: Black
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
COLOUR
POLI..
N$ 195.50
Ex VAT:N$ 170.00